If you're thinking of purchasing one of our Power Racks, Squat Racks or Cable Machines, you'll need to ensure that they are compatible with the barbell you're using.
Please note that you always require enough clearance on either side of the barbell to load/unload weight plates.
The following barbells are compatible with RPM Power racks:
| Rack Series/Barbell | 4ft/1200mm | 5ft/1500mm | 6ft/1800mm | 6.5ft/2000mm | 7ft/2200mm |
| Crossover Racks | ✗ | ✗ | ✔* | ✔ | ✔ |
| Kratos Rack | ✗ | ✗ | ✗ | ✔ | ✔ |
| Styker Rack | ✗ | ✗ | ✗ | ✔ | ✔ |
| Loki Rack | ✗ | ✗ | ✔ | ✔ | ✔ |
| Ragnar Rack | ✗ | ✗ | ✔* | ✔ | ✔ |
| Tyr Rack | ✗ | ✗ | ✔* | ✔ | ✔ |
| Rebel Rack | ✗ | ✗ | ✗ | ✔ | ✔ |
| Renegade Rack | ✗ | ✗ | ✗ | ✔ | ✔ |
| Bay Rig Racks | ✗ | ✗ | ✗ | ✔ | ✔ |
| Wall-Mounted Squat Rack | ✗ | ✗ | ✗ | ✔ | ✔ |
| Ultra Squat Rack | ✗ | ✗ | ✗ | ✔ | ✔ |
| Adjustable Squat Rack Pro | ✗ | ✔ | ✔ | ✔ | ✔ |
*The barbell can be used with this rack, however there is a very small gap of approx. 1cm between the end sleeve of the barbell and the J-hook on the rack. This will not impede the functionality of the barbell, however, it is recommended that caution be taken each time you rack/unrack the barbell and for convenience, it might be easier to go with a longer barbell.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article